NSN 5306-00-870-2997
Coaxial Connector
0.640 inches fastener length, double hexagon extended washer head style, 0.300 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 8436514 for national stock number 5306008702997.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-870-2997.
-
MPN or Model
8436514
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.390 inches -
Fastener Length
0.640 inches -
Head Style
Double hexagon extended washer -
Head Height
0.300 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-241-3657 MPN 10885742Electrical Box Connector
- 5905-00-270-6549 MPN 1711753Inductive Wire Wound Fixed Resistor
- 5905-00-816-3004 MPN 1066548G1Adjustable Resistor
- 5935-00-833-9943 MPN 8436979-5Electrical Receptacle Connector
- 5305-00-973-3119 MPN 7792348Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-870-2997 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8436514 | Army, United States Department Of |