NSN 5306-00-871-4281
Coaxial Connector
1.822 inches fastener length, double hexagon extended washer head style, 0.721 inches head height, width between flats: 0.817 inches .
Manufacturer part number 756065-1 for national stock number 5306008714281.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-871-4281.
-
MPN or Model
756065-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.572 inches -
Fastener Length
1.822 inches -
Head Style
Double hexagon extended washer -
Head Height
0.721 inches -
Width Between Flats
0.817 inches -
Extended Washer Diameter
1.230 inches -
Extended Washer Thickness
0.188 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-016-2012 MPN 3W33115-101Panel Assembly
- 1560-00-018-5170 MPN 779841-1Purifie Clamp Block
- 1560-00-022-0296 MPN 766481-13Brake Tube Assembly
- 1560-00-074-1544 MPN 367705-1Duct Assembly
- 1560-00-074-4232 MPN 3T60035-124Leading Edge Stub Assembly
- 1560-00-098-7967 MPN 342281Aircraft Door
- 1560-00-102-7751 MPN 4F61348-101ADoor Track Assembly
- 1560-00-103-0906 MPN 4J11016-171AAircraft Leading Edge
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-871-4281 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
756065-1 | Lockheed Martin Corporation |