NSN 5306-00-871-8477
Coaxial Connector
5.344 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 65150-00003-104 for national stock number 5306008718477.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-871-8477.
-
MPN or Model
65150-00003-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
5.344 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
4.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 1 federal specification single treatment response threads -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-004-0410 MPN S6230-61025-002Leaf
- 1680-00-008-3791 MPN S6158-61023-2Elec Cable Assembly
- 1560-00-023-9103 MPN 65275-04101-043Aircraft Structural Component Support
- 1560-00-065-8093 MPN S6120-62292-3Aircraft Fairing
- 1560-00-416-9160 MPN 65203-08002-054Sponson Liner Assy
- 1560-00-471-1798 MPN 65070-30407-014Aircraft Engine Build-up Parts Kit
- 1560-00-694-4709 MPN S14-30-7402Power Plant Inlet Fitting
- 1560-00-694-4726 MPN S14-35-4369Warning Unit Pressure Oil Elbow
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-871-8477 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65150-00003-104 | Sikorsky Aircraft Corporation |