NSN 5306-00-875-9987
Coaxial Connector
4.235 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number BACB30LC8-56D for national stock number 5306008759987.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-875-9987.
-
MPN or Model
BACB30LC8-56D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
4.235 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Single Shear Strength
20028 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lc manufacturers standard
More from these suppliers
- 1680-00-069-9519 MPN 114E6050-34Cable Fork Assembly
- 5905-00-432-9314 MPN BACRH14U365R0BFFilm Fixed Resistor
- 1560-00-631-6185 MPN 5-86559-137Gap Wing Cover
- 1560-00-679-7888 MPN 6-68047-9Aircraft Latch Assembly
- 1560-00-761-7995 MPN 107E4675-55Heat And Vent Duct
- 1560-00-778-5387 MPN 39-9932Reservoir Scupper Seal
- 1560-00-796-6368 MPN 65-33095-3Aircraft Former
- 1560-00-870-5557 MPN 65-11644Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-875-9987 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LC8-56D | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)