NSN 5306-00-878-9929
Close Tolerance Hex Head Bolt
Between 0.750 inches and 0.760 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number CV15-901636-1 for national stock number 5306008789929.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-878-9929.
-
MPN or Model
CV15-901636-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.330 inches and 0.350 inches -
Fastener Length
Between 0.750 inches and 0.760 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.410 inches and 0.420 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-411-7012 MPN 216-53301-1Pressure Switch
- 1560-00-496-2254 MPN 216-76301-7Special Purpose Thermal Insulation
- 1560-00-524-7127 MPN CV15-405594-2Fitting Assy
- 1560-00-590-3966 MPN CV15-620027-24Aircraft Access Cover
- 1560-00-852-9191 MPN 215-28151-2Aileron And Horizontal Stabi Box
- 1560-00-852-9633 MPN 215-30323-5Aircraft Skin
- 1560-00-853-1040 MPN 215-60206-10Aircraft Leading Edge
- 5905-00-877-9858 MPN CVC5895UNAFC252Nonprecision Nonwire Wound Variable Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-878-9929 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CV15-901636-1 | Triumph Aerostructures, Llc |