NSN 5306-00-880-9633
Coaxial Connector
5.060 inches fastener length, hexagon head style, 0.200 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number 215-99406-2 for national stock number 5306008809633.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-880-9633.
-
MPN or Model
215-99406-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.520 inches -
Fastener Length
5.060 inches -
Head Style
Hexagon -
Head Height
0.200 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.8715 inches and 0.8725 inches -
Thread Diameter
0.875 inches -
Grip Length
4.540 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-122-6816 MPN 215-49406-1Small Arms-fragmentation Protective Supplemental Armor
- 1560-00-242-0571 MPN 215-49417-2Small Arms-fragmentation Protective Supplemental Armor
- 1560-00-256-4420 MPN 216-60200-23Horizontal Stabilizer
- 5935-00-432-6421 MPN S401-2216-1-5A2Electrical Connector Backshell
- 5935-00-478-7508 MPN CVC2615-7BElectrical Connector Cable Clamp
- 1560-00-853-1677 MPN 215-70350-2Wing Spoiler Assembly
- 1560-00-853-3695 MPN 215-24479-3Launch Hook
- 5905-00-877-9794 MPN 215-00838-5Precision Wire Wound Variable Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-880-9633 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
215-99406-2 | Triumph Aerostructures, Llc |