NSN 5306-00-882-2315
Wheel Bolt
4.500 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number MS35291-50 for national stock number 5306008822315.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-882-2315.
-
MPN or Model
MS35291-50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.875 inches -
Fastener Length
4.500 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Grip Length
3.625 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
69000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-104-8339 MPN MS35043-221Composition Fixed Resistor
- 5940-00-113-9820 MPN MS20659-128Lug Terminal
- 5930-00-150-0653 MPN MS25089-2FRPush Switch
- 5935-00-201-7931 MPN MS35117-1Electrical Receptacle Connector
- 5905-00-252-5434 MPN MS35043-65Composition Fixed Resistor
- 5935-00-261-7705 MPN MS27473T12B8SNElectrical Plug Connector
- 5905-00-308-7594 MPN RN60D1202FFilm Fixed Resistor
- 5935-00-351-5944 MPN MS27488-A-22Electrical Connector End Seal Plug
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-882-2315 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35291-50 | Military Standards |
25704-281210-70-0 | Bundesamt Fuer Ausruestung, |
25704-281210-70-0 | Krauss-maffei Wegmann Gmbh & Co. |
MS35291-50 | Feinmechanische Werke Mainz Gmbh |
MS35291-50 | Liebherr-aerospace Lindenberg Gmbh |