NSN 5306-00-884-0102
Coaxial Connector
3.694 inches fastener length, double hexagon extended washer head style, 0.435 inches head height, width between flats: between 0.494 inches and 0.503 inches .
Manufacturer part number 53-41107-3 for national stock number 5306008840102.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-884-0102.
-
MPN or Model
53-41107-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
3.694 inches -
Head Style
Double hexagon extended washer -
Head Height
0.435 inches -
Width Between Flats
Between 0.494 inches and 0.503 inches -
Extended Washer Diameter
0.745 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
3.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.493 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-034-6214 MPN 32-31795-57Aircraft Access Cover
- 1560-00-084-3805 MPN 32-17022-305Aircraft Trailing Edge
- 1560-00-113-0074 MPN 53-42001-302Aircraft Door
- 1560-00-226-2387 MPN 53-58602-1Fuel Transfer Tube Assembly
- 1560-00-272-7797 MPN 68A731011-2003Leading Edge Closure Assembly
- 1560-00-283-8114 MPN 68A113055-2034Chordwise Plate
- 1680-00-326-8668 MPN 68A620030-1006Bell Crank
- 1560-00-350-7817 MPN 53G970125-3Spacing Rac Shackle
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-884-0102 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53-41107-3 | Boeing Company, The |