NSN 5306-00-884-1970
Coaxial Connector
1.031 inches fastener length, dished hexagon head style, 0.156 inches head height, width between flats: 0.438 inches .
Manufacturer part number 3M33-4H9 for national stock number 5306008841970.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-884-1970.
-
MPN or Model
3M33-4H9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.981 inches -
Fastener Length
1.031 inches -
Head Style
Dished hexagon -
Head Height
0.156 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Single Shear Strength
4128 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-169-0322 MPN 53-39295-1Aircraft Access Door
- 1560-00-272-7797 MPN 68A731011-2003Leading Edge Closure Assembly
- 5945-00-275-7027 MPN 68-790054-101Electromagnetic Relay
- 1560-00-282-1080 MPN 68A311952-2133Aircraft Skin
- 1560-00-283-8338 MPN 68A335100-2151Aircraft Fairing
- 1560-00-307-2780 MPN 68B580123-101Filler Opening Cap
- 5940-00-394-3533 MPN 5M70-1920Grounding Metallic Shielded Cable Ferrule
- 1560-00-411-4908 MPN 32-12019-3Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-884-1970 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4H9 | Boeing Company, The |