NSN 5306-00-885-8547
Wheel Bolt
Between 0.938 inches and 0.984 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number LL6-7 for national stock number 5306008858547.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-885-8547.
-
MPN or Model
LL6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.631 inches and 0.651 inches -
Fastener Length
Between 0.938 inches and 0.984 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Locking Feature
Strip threads -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 0.297 inches and 0.327 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.739 inches first hole and 0.759 inches first hole -
Material
Steel comp 4140 or steel comp 4130 or steel comp 8740 or steel comp 8630 or steel comp 8735 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-493-7107 MPN LP500-10-8MSocket Head Cap Screw
- 5306-01-298-7757 MPN LP35307-312Machine Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-885-8547 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LL6-7 | Long-lok Fasteners Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)