NSN 5306-00-889-9037
Coaxial Connector
0.628 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.435 inches .
Manufacturer part number 783617-1 for national stock number 5306008899037.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-889-9037.
-
MPN or Model
783617-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
0.628 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.435 inches -
Hole Diameter
0.048 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-015-1699 MPN 3C10002-109Control Column Base
- 1560-00-042-9804 MPN 800056-103Wing Flap Assembly
- 1560-00-072-2571 MPN 782249-501Aft Can Handle Assy
- 1560-00-076-6613 MPN 3P00100-112Aircraft Fairing
- 1680-00-079-3196 MPN 4C54898-101CSwitc Carriage Assy
- 1560-00-098-7967 MPN 342281Aircraft Door
- 1560-00-111-4642 MPN 3P21858-101Bifurcation Duct Lower Fitting
- 1680-00-126-2803 MPN 4C51057-101BReaction Cylinder Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-889-9037 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
783617-1 | Lockheed Martin Corporation |