NSN 5306-00-889-9039
Coaxial Connector
1.004 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.435 inches .
Manufacturer part number 783617-5 for national stock number 5306008899039.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-889-9039.
-
MPN or Model
783617-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
1.004 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.435 inches -
Hole Diameter
0.048 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.688 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-008-3929 MPN 4C95016-135DBallscrew Assembly
- 4920-00-014-1505 MPN B145Load Test Fixture
- 1560-00-016-2115 MPN 3A30132-101Heat Exchanger Air Duct
- 1560-00-055-6830 MPN 768469-101Nose Ste Cable Assy
- 1560-00-068-3747 MPN 3F42131-101Petal Door Forward Latch Cover
- 1560-00-073-5078 MPN 3A40077-119Aircraft Duct Insulation
- 1560-00-080-3532 MPN 342986LFuselage Longeron Assembly
- 4920-00-103-9919 MPN 4S90530-101AAircraft Engine Test Stand
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-889-9039 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
783617-5 | Lockheed Martin Corporation |