NSN 5306-00-902-8167
Coaxial Connector
1.275 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number EWSB22-6-14 for national stock number 5306009028167.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-902-8167.
-
MPN or Model
EWSB22-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
1.275 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.142 inches first hole -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-054-6677 MPN SK2015-620Machine Screw
- 5305-00-347-7847 MPN LS15265V3-7Close Tolerance Screw
- 5305-00-821-6028 MPN NAS1102-02-4Machine Screw
- 5305-00-941-0212 MPN 502089Machine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-119-3611 MPN NAS1101E6-18Machine Screw
- 5305-01-158-5372 MPN AIC940-3-12Machine Screw
- 5305-01-254-2786 MPN AIC4406-8Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-902-8167 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-6-14 | Sps Technologies, Llc |
VS2521-6F14S | Arconic Global Fasteners & Rings, |
EWSB22D-6-14 | Sps Technologies, Llc |
AIC220-6-14 | Sps Technologies, Llc |
EWSB22-6-14 | Sps Technologies, Llc |
C699-6-14 | Alcoa Global Fasteners, Inc. |
C699-6-14 | Lockheed Martin Corporation |
VS2521-6F14S | Alcoa Global Fasteners, Inc. |