NSN 5306-00-912-5230
Wheel Bolt
0.622 inches fastener length, hexagon head style, between 0.085 inches and 0.105 inches head height, width between flats: between 0.305 inches and 0.313 inches .
Manufacturer part number 3001T70P04 for national stock number 5306009125230.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-912-5230.
-
MPN or Model
3001T70P04
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.322 inches -
Fastener Length
0.622 inches -
Head Style
Hexagon -
Head Height
Between 0.085 inches and 0.105 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Thread Diameter
0.164 inches -
Grip Length
0.300 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
247.0 brinell standard head and 344.0 brinell standard head -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-149-3541 MPN K7897079P2Electrical Plug Connector
- 5940-00-155-7041 MPN 588250REV1PC4Terminal Board
- 5905-00-202-0560 MPN RB16CE25002FWire Wound Fixed Resistor
- 5950-00-314-2749 MPN 11K3210ITEM11Power D Transformer
- 5950-00-314-2749 MPN 221B863ITEM38Power D Transformer
- 5950-00-351-5233 MPN B7406965Audio Frequency Transformer
- 5930-00-382-5761 MPN 8761616PC5Centrifugal Switch
- 5935-00-404-4743 MPN ML7466131G4Dynamotor Jack
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-912-5230 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3001T70P04 | General Electric Company |
3001T70P04 | General Electric Co |