NSN 5306-00-913-2619
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, double hexagon w/hole head style, between 0.250 inches and 0.270 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 2-160-423-02 for national stock number 5306009132619.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-913-2619.
-
MPN or Model
2-160-423-02
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.635 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.250 inches and 0.270 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.250 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Round -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel -
Material Specification
Ams 6322, comp 8740 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-008-8914 MPN 975432-1Valve Nozzle
- 4920-00-124-9517 MPN 285286-1-1Aircraft Engine Maintenance Fixture
- 4920-00-706-0595 MPN 281309Seal Broaching Sleeve
- 4920-00-831-0397 MPN LTCT10168Thermocouple Clamp
- 4820-00-898-2861 MPN 354077Valve Seat
- 4920-01-127-0313 MPN 292294-1Component Board
- 4820-01-263-0180 MPN 109840-1-1Safety Relief Valve
- 4920-01-349-0544 MPN 3661040-1Built Up Support Assembly
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-913-2619 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2-160-423-02 | Honeywell International Inc. |