NSN 5306-00-913-8661
Coaxial Connector
Between 0.888 inches and 0.935 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number VS2521-7F7 for national stock number 5306009138661.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-913-8661.
-
MPN or Model
VS2521-7F7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.466 inches and 0.566 inches -
Fastener Length
Between 0.888 inches and 0.935 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-119-7413 MPN 67077-4-5Close Tolerance Screw
- 5305-00-421-7888 MPN 66117H4-7Close Tolerance Screw
- 5305-00-505-4141 MPN LS15237C4-20Close Tolerance Screw
- 5305-00-510-5288 MPN LS15263V06-5Machine Screw
- 5305-00-627-9191 MPN NAS1190-3P10Socket Head Cap Screw
- 5305-00-754-0989 MPN NAS1209-10WClose Tolerance Screw
- 5305-00-951-5443 MPN NAS1101C04-5Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-913-8661 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2521-7F7 | Alcoa Global Fasteners, Inc. |
EWSB22-7A7 | Sps Technologies, Llc |
EWSB22-7A7 | Sps Technologies, Llc |
C081-7-7 | Lockheed Martin Corporation |