NSN 5306-00-914-3866
Close Tolerance Hex Head Bolt
4.005 inches fastener length, double hexagon extended washer head style, 0.965 inches head height, width between flats: between 1.115 inches and 1.127 inches .
Manufacturer part number STSBG003A14U040 for national stock number 5306009143866.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-914-3866.
-
MPN or Model
STSBG003A14U040
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.505 inches -
Fastener Length
4.005 inches -
Head Style
Double hexagon extended washer -
Head Height
0.965 inches -
Width Between Flats
Between 1.115 inches and 1.127 inches -
Extended Washer Diameter
Between 1.635 inches and 1.645 inches -
Extended Washer Thickness
0.211 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Thread Diameter
0.875 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
14 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-231-7422 MPN ST3M733-6L-9Close Tolerance Screw
- 5305-01-462-2725 MPN 3M1169V3-9AClose Tolerance Screw
- 5306-00-926-4357 MPN 3014T59P01Machine Bolt
- 5306-01-141-4090 MPN VFK600-5H18FShear Bolt
- 5306-01-146-6139 MPN VCG0001-7-18Close Tolerance Bolt
- 5306-01-196-5569 MPN VFK600-7-28Shear Bolt
- 5306-01-202-8971 MPN BACB30LM3-42Shear Bolt
- 5306-01-330-7083 MPN VCG0016-5-17Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-914-3866 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
STSBG003A14U040 | Lockheed Martin Corporation |
LS5995-14-40 | Lockheed Martin Corporation |
STSBG003A14U040 | Sps Technologies, Llc |
STSBG003A14U040 | Valley-todeco, Inc. |
STSBG003A14U040 | Sps Technologies, Llc |
STSBG003A14U040 | Sonic Industries Inc. |
STSBG003A14U040 | Sps Technologies, Llc |
11699A14U040 | Reid Products Inc. |
STSBG003A14U040 | Alcoa Global Fasteners, Inc. |