NSN 5306-00-916-6490
Wheel Bolt
Tensile strength at room temperature.
Manufacturer part number NAS1003-7 for national stock number 5306009166490.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-916-6490.
-
MPN or Model
NAS1003-7
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.481 inches -
Fastener Length
0.919 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
0.438 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.704 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-400-4774 MPN NAS1668-3Electrical Connector End Seal Plug
- 5940-00-432-7375 MPN NAS1746-1Conductor Splice
- 5940-00-892-2911 MPN NAS1388-3Conductor Splice
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5940-01-455-2461 MPN NAS1063A10-105BGTerminal Board Marker Strip
- 5305-00-008-5887 MPN NAS1102C06-10PMachine Screw
- 5305-00-052-8876 MPN MS24630-4Tapping Screw
- 5305-00-058-4012 MPN MIL-S-7839Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-916-6490 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1003-7 | National Aerospace Standards |