NSN 5306-00-917-0896
Coaxial Connector
1.588 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BM55132-6-19 for national stock number 5306009170896.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-0896.
-
MPN or Model
BM55132-6-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
1.588 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
1.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-304-8777 MPN AIC811-02-5Socket Head Cap Screw
- 5305-00-347-7853 MPN LS15265V3-18Close Tolerance Screw
- 5305-00-802-1827 MPN 51B221-1Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-00-917-6317 MPN A1C82-5-10Machine Screw
- 5305-01-058-3314 MPN NAS1101E3-8PMachine Screw
- 5305-01-104-1066 MPN HT4068-3-8AClose Tolerance Screw
- 5305-01-169-0016 MPN LD111-044-2405Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-0896 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM55132-6-19 | Huck International, Inc. |
VS2521-6F19 | Arconic Global Fasteners & Rings, |
EWSB22-6A19 | Sps Technologies, Llc |
AIC220-6A19 | Sps Technologies, Llc |
202-15520-6-19 | Triumph Aerostructures, Llc |
EWSB22-6A19 | Sps Technologies, Llc |
C081-6-19 | Sps Technologies, Llc |
C081-6-19 | Alcoa Global Fasteners, Inc. |
C081-6-19 | Lockheed Martin Corporation |
BM55132-6-19 | Huck Intl Inc |
VS2521-6F19 | Alcoa Global Fasteners, Inc. |