NSN 5306-00-917-4615
Coaxial Connector
1.094 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS675V10 for national stock number 5306009174615.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-4615.
-
MPN or Model
NAS675V10
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.094 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-336-8434 MPN NAS1057T6-050Stud Terminal
- 5940-01-435-3633 MPN NAS1063A10-502AVTerminal Board Marker Strip
- 5305-00-054-9234 MPN MS24694C122Machine Screw
- 5305-00-058-4039 MPN NAS1133-3Close Tolerance Screw
- 5305-00-068-0502 MPN MS90725-6Hexagon Head Cap Screw
- 5305-00-069-4959 MPN MS24677-61Socket Head Cap Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-127-0165 MPN NAS623-3-29Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-4615 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS675V10 | National Aerospace Standards |