NSN 5306-00-917-4625
Coaxial Connector
1.338 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS673V16D for national stock number 5306009174625.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-4625.
-
MPN or Model
NAS673V16D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
1.338 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.175 inches first hole -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-397-5197 MPN NAS162Control Wheel H Cap
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5935-00-885-9033 MPN NAS1196-4Electrical Receptacle Connector
- 5935-01-447-1147 MPN 2805821P01Electrical Receptacle Connector
- 5940-01-615-1073 MPN NAS1063C10-210HTerminal Board Marker Strip
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-018-7513 MPN NAS1219-5-16PMachine Screw
- 5305-00-043-2677 MPN MS24694S94Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-4625 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS673V16D | National Aerospace Standards |