NSN 5306-00-917-4858
Wheel Bolt
Between 1.922 inches and 1.968 inches fastener length, hexagon head style, between 0.453 inches and 0.485 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number AN14-16A for national stock number 5306009174858.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-917-4858.
-
MPN or Model
AN14-16A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.220 inches and 1.296 inches -
Fastener Length
Between 1.922 inches and 1.968 inches -
Head Style
Hexagon -
Head Height
Between 0.453 inches and 0.485 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 0.672 inches and 0.702 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-6758 military specification 4th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-565-9498 MPN AN3014Toggle Switch
- 5306-00-205-3421 MPN AN42B31AEye Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-917-4858 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN14-16A | Air Force-navy Aeronautical |