NSN 5306-00-917-6189
Coaxial Connector
1.344 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS675V14H for national stock number 5306009176189.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-6189.
-
MPN or Model
NAS675V14H
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.344 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-007-6183 MPN NAS1100E04-13PMachine Screw
- 5305-00-052-7004 MPN MS21295-36Socket Head Cap Screw
- 5305-00-054-9243 MPN MS24694C104Machine Screw
- 5305-00-082-6735 MPN MS51959-119Machine Screw
- 5305-00-171-2561 MPN NAS1123C12Close Tolerance Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-6189 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS675V14H | National Aerospace Standards |