NSN 5306-00-917-6200
Coaxial Connector
1.550 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS674V18D for national stock number 5306009176200.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-6200.
-
MPN or Model
NAS674V18D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.550 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.369 inches first hole -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9126 MPN NAS25Trunnion Tank Strap
- 1560-01-650-3955 MPN 72007Aircraft Structural Component Fitting
- 5305-00-007-0216 MPN NAS1743C4T20USocket Head Cap Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-052-8878 MPN MS24630-9Tapping Screw
- 5305-00-078-0248 MPN NASM24693-BB23Machine Screw
- 5305-00-078-8606 MPN NAS560HK3-15Machine Screw
- 5305-00-078-8708 MPN MS51045-18Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-6200 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS674V18D | National Aerospace Standards |
Stock Check
- NS: 1
- NE: 173