NSN 5306-00-917-6253
Coaxial Connector
0.849 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number LWB22-4-7 for national stock number 5306009176253.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-917-6253.
-
MPN or Model
LWB22-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.412 inches -
Fastener Length
0.849 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.433 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.437 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-163-2692 MPN C4563-5-10Close Tolerance Screw
- 5305-00-914-9247 MPN NAS1101-04-11Machine Screw
- 5305-01-047-6250 MPN 51B222-22Close Tolerance Screw
- 5305-01-196-8132 MPN LD111-0047-0404Close Tolerance Screw
- 5305-01-328-9227 MPN AIC1700-3-5Close Tolerance Screw
- 5305-01-386-3101 MPN AIC1198-3-18Machine Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
- 5305-01-428-2140 MPN AIC984-3-11RShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-917-6253 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LWB22-4-7 | Sps Technologies, Llc |
AIC220EL4-7 | Sps Technologies, Llc |
VS2201F4-7 | Alcoa Global Fasteners, Inc. |
LWB22-4-7 | Sps Technologies, Llc |
C083-4-7 | Lockheed Martin Corporation |