NSN 5306-00-925-7878
Coaxial Connector
0.730 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB22-4-7 for national stock number 5306009257878.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-925-7878.
-
MPN or Model
EWSB22-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
0.730 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.605 inches first hole -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-088-6131 MPN 3MA333FA5Machine Screw
- 5305-00-159-9593 MPN AIC813-04R6Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-050-9001 MPN AIC984-3-9PClose Tolerance Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-052-9112 MPN AIC984-3-7PClose Tolerance Screw
- 5305-01-055-1137 MPN NAS1101-06-16Machine Screw
- 5305-01-170-8493 MPN LD111-0044-0512Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-925-7878 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-4-7 | Sps Technologies, Llc |
68744-4-7 | Sps Technologies, Llc |
EWSB22-4-7 | Sps Technologies, Llc |
BM55132-4-7 | Huck International, Inc. |
C699-4-7 | Lockheed Martin Corporation |
BM55132-4-7 | Huck Intl Inc |
AIC220-4-7 | Sps Technologies, Llc |