NSN 5306-00-925-9752
Coaxial Connector
1.038 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BM55156-5-11A for national stock number 5306009259752.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-925-9752.
-
MPN or Model
BM55156-5-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.350 inches -
Fastener Length
1.038 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b5 manufacturers standard
More from these suppliers
- 5305-00-182-9410 MPN CVC241A4-20Machine Screw
- 5305-00-470-3369 MPN NAS1101C06-24Machine Screw
- 5305-00-515-6935 MPN AIC551C3-461Shoulder Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-060-9602 MPN AIC984-6-32PClose Tolerance Screw
- 5305-01-082-9291 MPN AIC1184-304Close Tolerance Screw
- 5305-01-286-1763 MPN LD111-0044-0407Close Tolerance Screw
- 5305-01-313-9328 MPN AIC551C-04-154Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-925-9752 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM55156-5-11A | Huck International, Inc. |
C081-5-11 | Alcoa Global Fasteners, Inc. |
C081-5-11 | Sps Technologies, Llc |
C081-5-11 | Sps Technologies, Llc |
EWSB22-5A11 | Sps Technologies, Llc |
GB511B5-11 | Northrop Grumman Systems Corporation |
EWSB22-5A11 | Sps Technologies, Llc |
C081-5-11 | Lockheed Martin Corporation |
BM55156-5-11A | Huck Intl Inc |
AIC220-5A11 | Sps Technologies, Llc |
AIC516B5-11 | Sps Technologies, Llc |
VS2521-5F11 | Alcoa Global Fasteners, Inc. |
VS2521-5F11 | Arconic Global Fasteners & Rings, |