NSN 5306-00-925-9772
Coaxial Connector
1.351 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number EWSB22-5A16 for national stock number 5306009259772.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-925-9772.
-
MPN or Model
EWSB22-5A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.351 inches -
Fastener Length
1.351 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3109 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2747 MPN LS1526V3-56Machine Screw
- 5305-01-047-1002 MPN BACB30LU5-19Close Tolerance Screw
- 5305-01-058-3314 MPN NAS1101E3-8PMachine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-329-9957 MPN AIC4463-3-24Machine Screw
- 5305-01-348-7104 MPN AIC1700-4-15Close Tolerance Screw
- 5305-01-439-5688 MPN TX1026V3-16AClose Tolerance Screw
- 5305-01-465-2401 MPN TX1026D3-8AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-925-9772 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-5A16 | Sps Technologies, Llc |
AIC220-5A16 | Sps Technologies, Llc |
VS2521-5F16 | Alcoa Global Fasteners, Inc. |
EWSB22-5A16 | Sps Technologies, Llc |
BM55132-5-16A | Huck International, Inc. |
C081-5-16 | Lockheed Martin Corporation |
BM55132-5-16A | Huck Intl Inc |