NSN 5306-00-925-9775
Coaxial Connector
1.788 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number EWSB22-5-23 for national stock number 5306009259775.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-925-9775.
-
MPN or Model
EWSB22-5-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.351 inches -
Fastener Length
1.788 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.670 inches first hole -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-031-1136 MPN 51B581-3-7Close Tolerance Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-547-3451 MPN AIC792-5-15Close Tolerance Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-971-7531 MPN AIC82-6-31Machine Screw
- 5305-01-095-4606 MPN AIC812-00-4Machine Screw
- 5305-01-101-1436 MPN AIC870-3-14Socket Head Cap Screw
- 5305-01-134-8725 MPN AIC551C-04-179Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-925-9775 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-5-23 | Sps Technologies, Llc |
AIC220-5-23 | Sps Technologies, Llc |
VS2521-5F23S | Alcoa Global Fasteners, Inc. |
EWSB22-5-23 | Sps Technologies, Llc |
C699-5-23 | Lockheed Martin Corporation |