NSN 5306-00-928-9439
Coaxial Connector
1.957 inches fastener length, double hexagon extended washer head style, 0.405 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number C305-6-20 for national stock number 5306009289439.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-928-9439.
-
MPN or Model
C305-6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.707 inches -
Fastener Length
1.957 inches -
Head Style
Double hexagon extended washer -
Head Height
0.405 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.715 inches and 0.725 inches -
Extended Washer Thickness
0.075 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN 3M943C4G3-4Headle Shoulder Pin
- 5305-00-150-3263 MPN AIC83-4A11Close Tolerance Screw
- 5305-00-463-6364 MPN A1102S08-8Machine Screw
- 5305-00-558-8672 MPN TS5A16Machine Screw
- 5305-01-119-7188 MPN BACB30LU4-24Close Tolerance Screw
- 5305-01-184-3777 MPN BACB30LU8-21YShoulder Screw
- 5305-01-195-7947 MPN HT4075V4-10-42Close Tolerance Screw
- 5305-01-462-2861 MPN TX1026V3-8AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-928-9439 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C305-6-20 | Lockheed Martin Corporation |
VS2005-6-20 | Arconic Global Fasteners & Rings, |
AIC260E6-20 | Sps Technologies, Llc |
EWB26-6-20 | Sps Technologies, Llc |
EWB26-6-20 | Sps Technologies, Llc |
C305-6-20 | Sps Technologies, Llc |
C305-6-20 | Sps Technologies, Llc |
C305-6-20 | Alcoa Global Fasteners, Inc. |
VS2005-6-20 | Alcoa Global Fasteners, Inc. |