NSN 5306-00-929-1723
Coaxial Connector
2.703 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS658V36 for national stock number 5306009291723.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-929-1723.
-
MPN or Model
NAS658V36
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
2.703 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
2.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5940-00-688-6000 MPN NAS705T2Stud Terminal
- 5935-01-597-0337 MPN E0762F15-04LSpec Backshell
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-6182 MPN NAS1100E04-10PMachine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-929-1723 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS658V36 | National Aerospace Standards |