NSN 5306-00-929-1749
Coaxial Connector
2.691 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS654V38 for national stock number 5306009291749.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-929-1749.
-
MPN or Model
NAS654V38
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
2.691 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
2.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-016-7125 MPN MS3212-6Machine Screw
- 5305-00-071-2506 MPN B1821BH025C050NHexagon Head Cap Screw
- 5305-00-087-8699 MPN NAS662-3R7Machine Screw
- 5305-00-138-9818 MPN NAS1634-8Machine Screw
- 5305-00-182-9506 MPN NAS662C2LNR5Socket Head Cap Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
- 5305-00-281-8121 MPN NAS1581F3H10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-929-1749 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS654V38 | National Aerospace Standards |