NSN 5306-00-929-5239
Coaxial Connector
2.062 inches fastener length, hexagon head style, between 0.188 inches and 0.204 inches head height, width between flats: between 0.562 inches and 0.578 inches .
Manufacturer part number NAS464P6L26 for national stock number 5306009295239.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-929-5239.
-
MPN or Model
NAS464P6L26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
2.062 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.204 inches -
Width Between Flats
Between 0.562 inches and 0.578 inches -
Grip Diameter
Between 0.3735 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
10500 pounds per square inch -
Thread Diameter
0.375 inches -
Grip Length
1.843 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.843 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas464 professional/industrial association standard
More from these suppliers
- 5940-01-425-6526 MPN NAS1063A14-404Terminal Board Marker Strip
- 5305-00-007-9895 MPN NAS1102C04-12PMachine Screw
- 5305-00-008-5886 MPN NAS1102E06-8PMachine Screw
- 5305-00-008-5920 MPN NAS1190C04T5LSocket Head Cap Screw
- 5305-00-008-7864 MPN NAS1631E2Machine Screw
- 5305-00-051-2355 MPN NAS514P832-28Machine Screw
- 5305-00-051-4133 MPN MS24694C93Machine Screw
- 5305-00-058-0505 MPN NAS1351-3-10PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-929-5239 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P6L26 | National Aerospace Standards |