NSN 5306-00-930-2214
Externally Relieved Body Bolt
Between 1.210 inches and 1.230 inches fastener length, dee chamfer head style, between 0.740 inches and 0.760 inches head diameter, head height: between 0.240 inches and 0.260 inches .
Manufacturer part number 156015P25 for national stock number 5306009302214.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-930-2214.
-
MPN or Model
156015P25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
1a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.580 inches -
Fastener Length
Between 1.210 inches and 1.230 inches -
Head Style
Dee chamfer -
Head Diameter
Between 0.740 inches and 0.760 inches -
Head Height
Between 0.240 inches and 0.260 inches -
Distance From Centerline To Flat
Between 0.260 inches and 0.270 inches -
First Diameter From Head
Between 0.370 inches and 0.380 inches -
Second Diameter From Head
Between 0.461 inches and 0.462 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.084 inches and 0.104 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 0.650 inches and 0.710 inches -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
20 -
Externally Relieved Body Diameter Quantity
2 -
Material
Stainless steel -
Material Specification
Ams5735 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-142-7058 MPN PWA3113Engine Timi Segment
- 4920-00-570-7391 MPN PWA10154Compre Locator Assy
- 4920-00-826-7363 MPN PWA15726Test Adapter
- 4920-00-925-9891 MPN PWA21700Interface Device Adapter Assembly
- 4920-01-020-1296 MPN PWA53388Aircraft Component Test Plug
- 4920-01-058-2887 MPN PWA51777-25Rear Turbine Hub Spacer
- 4920-01-059-6889 MPN PWA51261-32Heater Front Compressor Block
- 4920-01-113-7361 MPN PWA53805-1Fixture Base
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-930-2214 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
156015P25 | United Technologies Corporation |