NSN 5306-00-930-3076
Coaxial Connector
Between 0.400 inches and 0.447 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number EWSB930-8-30 for national stock number 5306009303076.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-930-3076.
-
MPN or Model
EWSB930-8-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.582 inches -
Fastener Length
Between 0.400 inches and 0.447 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Single Shear Strength
180000 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-166 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1138 MPN 100-161-6-5Materi Aircraft Pin
- 5305-00-310-5867 MPN AIC811-04-8Socket Head Cap Screw
- 5305-00-808-0816 MPN NAS1102-08-12Machine Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-056-4415 MPN AIC984-3-2Close Tolerance Screw
- 5305-01-109-1350 MPN AIC985-10-36Close Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-234-1661 MPN BACB30LU04-4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-930-3076 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB930-8-30 | Sps Technologies, Llc |
AIC930-8-30 | Sps Technologies, Llc |
VS2767-8C30 | Alcoa Global Fasteners, Inc. |
C078-8-30 | Lockheed Martin Corporation |