NSN 5306-00-932-1915
Coaxial Connector
1.985 inches fastener length, dished hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1308-20D for national stock number 5306009321915.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-932-1915.
-
MPN or Model
NAS1308-20D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
1.985 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.769 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-727-3107 MPN NAS704C2Stud Terminal
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-051-4495 MPN MS51973-17Setscrew
- 5305-00-052-7496 MPN MS16995-95Socket Head Cap Screw
- 5305-00-060-4353 MPN NAS1100-08-22Machine Screw
- 5305-00-143-1986 MPN NAS1625-30Machine Screw
- 5305-00-191-3982 MPN NAS603-72PMachine Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-932-1915 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1308-20D | National Aerospace Standards |
NAS1308-20D | National Aerospace Standards |
NAS1308-20D | National Aerospace Standards |
NAS1308-20D | National Aerospace Standards |