NSN 5306-00-932-4180
Close Tolerance Hex Head Bolt
Between 1.923 inches and 1.953 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30GN5-25 for national stock number 5306009324180.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-932-4180.
-
MPN or Model
BACB30GN5-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.563 inches -
Fastener Length
Between 1.923 inches and 1.953 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.563 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-015-2152 MPN 69-12799-3Aircraft Structural Component Support
- 1680-00-021-6750 MPN 114E4020-3Li Modification Kit
- 1560-00-055-6756 MPN 5-73114-126Aircraft Leading Edge
- 1680-00-112-9038 MPN 6-18835Door Winch Pulley
- 1680-00-313-4889 MPN 3-99094Pilot Instr Fitting
- 1560-00-315-0546 MPN 9-66536Boom Control Bracket
- 1560-00-325-3570 MPN 90-5529-3Aircraft Fairing
- 1560-00-336-7426 MPN 90-1431Ring Spring Slide
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-932-4180 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |
BACB30GN5-25 | The Boeing Company |