NSN 5306-00-934-9795
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.812 inches and 0.859 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46C6 for national stock number 5306009349795.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-934-9795.
-
MPN or Model
AN46C6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.671 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.812 inches and 0.859 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole -
Overall Length
1.844 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.469 inches -
Distance From Threaded End To Shank Hole Center
0.609 inches first hole and 0.641 inches first hole -
Eye Outside Width
0.750 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5940-01-348-8237 MPN NAS1063A-20Terminal Board
- 5940-01-455-2469 MPN NAS1063C5-540BTerminal Board Marker Strip
- 5305-00-005-0582 MPN NAS5903-10Machine Screw
- 5305-00-055-2569 MPN NAS1216-04-07Machine Screw
- 5305-00-059-8229 MPN MS35214-4Machine Screw
- 5305-00-079-7360 MPN MS35307-388Hexagon Head Cap Screw
- 5305-00-097-8959 MPN NAS1190-06PP7KSocket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-934-9795 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46C6 | National Aerospace Standards |
AN46C6 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.