NSN 5306-00-936-2996
Close Tolerance Hex Head Bolt
Between 3.265 inches and 3.312 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN182C31 for national stock number 5306009362996.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-936-2996.
-
MPN or Model
AN182C31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.062 inches and 1.140 inches -
Fastener Length
Between 3.265 inches and 3.312 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 2.172 inches and 2.203 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.052 inches first hole and 2.072 inches first hole -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-4559 MPN AN3102E36-15PElectrical Receptacle Connector
- 5935-00-204-9377 MPN AN3108M14S9SElectrical Plug Connector
- 5935-00-642-4759 MPN AN3106A28-11SElectrical Plug Connector
- 5935-00-170-5323 MPN AN3102A8S1SElectrical Receptacle Connector
- 4820-01-398-0455 MPN AN6245B4-2600Safety Relief Valve
- 5305-00-081-7734 MPN AN505UB6-9Machine Screw
- 5305-00-151-2522 MPN AN509-10R14Machine Screw
- 5305-00-208-8417 MPN AN515PB8-8Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-936-2996 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN182C31 | Aeronautical Standards Group |