NSN 5306-00-937-9348
Wheel Bolt
Groove in bearing surface of head 0.050 in. Deep by 0.187 in. Wide.
Manufacturer part number 8023-082 for national stock number 5306009379348.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-937-9348.
-
MPN or Model
8023-082
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.563 inches and 0.667 inches -
Fastener Length
Between 0.719 inches and 0.781 inches -
Head Style
Hexagon -
Head Height
Between 0.281 inches and 0.343 inches -
Width Between Flats
Between 0.719 inches and 0.781 inches -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp 1213 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5975-00-503-0820 MPN SW90 241Dust And Moisture Seal Boot
- 5905-00-901-7977 MPN 64A100Noninductive Wire Wound Fixed Resistor
- 5950-00-978-9749 MPN 2084097Radio Frequency Coil
- 5935-01-024-1868 MPN 247AS45-229-001Electrical Plug Connector
- 5930-01-037-2567 MPN 412AS415-9Ind Assembly Switch
- 5905-01-299-6344 MPN 1551AS149-1Thermal Resistor
- 5985-01-354-7569 MPN 1310AS5101Electrical Dummy Load
- 5975-01-410-7646 MPN 2041AS757-01Dust And Moisture Seal Boot
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-937-9348 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8023-082 | Jaidinger Mfg. Co., Inc. |
68A4C557-1 | Naval Air Systems Command |
Stock Check
![](/public/images/partscage_shelf3.png)