NSN 5306-00-940-9011
Wheel Bolt
Between 0.719 inches and 0.750 inches fastener length, hexagon head style, between 0.188 inches and 0.198 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number 9409011 for national stock number 5306009409011.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-940-9011.
-
MPN or Model
9409011
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.639 inches -
Fastener Length
Between 0.719 inches and 0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.198 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.312 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Material Specification
Gm-300-m fscm 24617 mfr ref single material response -
Thread Series Designator
Unc
More from these suppliers
- 4820-01-028-5555 MPN A65083Valve Disk
- 5930-01-086-7050 MPN L33827Push-pull Switch
- 5930-01-135-8178 MPN S238765Push Switch
- 5935-01-607-3342 MPN 168694A1Electrical Plug Connector
- 4820-01-068-2273 MPN A45289Valve Disk
- 5306-01-292-8357 MPN 111-319Square Neck Bolt
- 4820-00-257-0984 MPN 10948154Check Valve
- 5905-00-797-6213 MPN 7375777Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-940-9011 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9409011 | U S Army Tank Automotive Command |
9409011 | Mtu America Inc. |
9409011 | Allison Transmission, Inc. |
121-104 | Cnh Industrial America Llc |
9409011 | General Motors Corp |
5306009409011 | E.c.a Etablissement |