NSN 5306-00-943-2007
Coaxial Connector
4.031 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 65160-00003-103 for national stock number 5306009432007.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-943-2007.
-
MPN or Model
65160-00003-103
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
4.031 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
3.563 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-045-7118 MPN S6180-63041-08Aircraft Fitting Assembly
- 1560-00-065-2601 MPN S6122-83152-118Skid Strip
- 1560-00-079-4337 MPN 65070-30400-034Aircraft Engine Build-up Parts Kit
- 1560-00-118-5754 MPN 65551-01020-042Wiring Harness Bracket Assy
- 1680-00-159-0833 MPN 65850-05164-042Tow Hook Winch Guide Roller
- 1560-00-456-6629 MPN S6175-63122-1Aircraft Floor
- 1680-00-493-4511 MPN S6122-87705-4Refueling Tube Ring
- 1560-00-700-2029 MPN S6120-62275-3Lh Upper Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-943-2007 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65160-00003-103 | Sikorsky Aircraft Corporation |