NSN 5306-00-943-2008
Coaxial Connector
4.281 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 65160-00003-104 for national stock number 5306009432008.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-943-2008.
-
MPN or Model
65160-00003-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
4.281 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Thread Diameter
0.438 inches -
Grip Length
3.813 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-058-0602 MPN S6130-80173-1Push-pull Control Assembly
- 1680-00-082-3355 MPN 61902-60255-041Channel Selector Panel
- 1560-00-482-0305 MPN S6122-83133-4Fuel Tank Liner
- 1560-00-591-6533 MPN S1620-63156-1Aircraft Floor
- 1560-00-606-7522 MPN S1640-61633-1Flight Controls Arm Assembly
- 1680-00-727-4635 MPN 65550-03091-102Cargo Hoist Circuit Tester
- 1560-00-915-6672 MPN 65300-12133-041Supportxassy Strut
- 1560-00-915-7143 MPN S6137-91100-013Clutch Housing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-943-2008 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65160-00003-104 | Sikorsky Aircraft Corporation |