NSN 5306-00-943-2511
Close Tolerance Hex Head Bolt
3.720 inches fastener length, hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 1.428 inches and 1.437 inches .
Manufacturer part number 756171-111 for national stock number 5306009432511.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-943-2511.
-
MPN or Model
756171-111
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.800 inches -
Fastener Length
3.720 inches -
Head Style
Hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 1.428 inches and 1.437 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
1.000 inches -
Grip Length
2.920 inches -
Thready Qty Per Inch (tpi)
12 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.580 inches first hole -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-119-7188 MPN BACB30LU4-24Close Tolerance Screw
- 5305-01-285-2753 MPN 3M927-4L20Close Tolerance Screw
- 5305-01-352-1215 MPN HR242-4-14Close Tolerance Screw
- 5306-00-175-7997 MPN VAL12004-4-010Machine Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-044-0740 MPN VAL22034-8F90Shear Bolt
- 5306-01-044-2972 MPN VAL23607-5-3Shoulder Bolt
- 5306-01-050-6153 MPN C4356N6D2956Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-943-2511 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
756171-111 | Lockheed Martin Corporation |
756171-111 | Valley-todeco, Inc. |
756171-111 | Sps Technologies, Llc |
756171-111 | V B Products Inc |