NSN 5306-00-944-7535
Coaxial Connector
1.874 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number EWSB26-8A21 for national stock number 5306009447535.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-944-7535.
-
MPN or Model
EWSB26-8A21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.561 inches -
Fastener Length
1.874 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
1.312 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5469 MPN AIC811-08-14Socket Head Cap Screw
- 5305-00-523-0771 MPN HT4028L4-5Close Tolerance Screw
- 5305-01-014-8454 MPN NAS1101E02-7Machine Screw
- 5305-01-263-3804 MPN AIC4043-06-11RMachine Screw
- 5305-01-381-2281 MPN AIC1701-4-13Close Tolerance Screw
- 5305-01-423-4565 MPN LD111-0044-0721Close Tolerance Screw
- 5305-01-433-8875 MPN TX1026V3-4AClose Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-944-7535 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB26-8A21 | Sps Technologies, Llc |
VS2106-8-21 | Alcoa Fastening Systems |
AIC260-8A21 | Sps Technologies, Llc |
VS2106-8-21 | Alcoa Global Fasteners, Inc. |
EWSB26-8A21 | Sps Technologies, Llc |
AIC516C-8-21 | Sps Technologies, Llc |
BM55156-8-21A | Huck International, Inc. |
GB511C8-21 | Northrop Grumman Systems Corporation |
BM55156-8-21A | Huck Intl Inc |