NSN 5306-00-944-7537
Close Tolerance Hex Head Bolt
0.828 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176C6A for national stock number 5306009447537.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-944-7537.
-
MPN or Model
AN176C6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.640 inches -
Fastener Length
0.828 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-3259 MPN AN3102E20-16PElectrical Receptacle Connector
- 5935-00-280-2084 MPN AN3102C10SL4PElectrical Receptacle Connector
- 5935-00-280-2442 MPN AN3108A22-19SElectrical Plug Connector
- 5935-00-283-7188 MPN AN3102A14S1SElectrical Receptacle Connector
- 5935-00-204-9381 MPN AN3108E20-29PElectrical Plug Connector
- 5305-00-004-3106 MPN AN116903Machine Screw
- 5305-00-055-2812 MPN AN507DD440R14Machine Screw
- 5305-00-150-9611 MPN AN501C10-12Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-944-7537 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176C6A | Aeronautical Standards Group |
5306009447537 | E.c.a Etablissement |
Stock Check
- NS: 218
- NE: 300