NSN 5306-00-945-2523
Coaxial Connector
1.811 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number BM55156-8-20A for national stock number 5306009452523.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-945-2523.
-
MPN or Model
BM55156-8-20A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.561 inches -
Fastener Length
1.811 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Single Shear Strength
30650 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 or steel -
Material Specification
Ams 6485 assn standard 1st material response or sps-m-107 fscm 56878 mfr ref 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5135 MPN ST3M455-4L12-1Close Tolerance Screw
- 5305-01-342-8580 MPN VLC0009-4-10Close Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
- 5306-00-143-2021 MPN VFK100G-09020Shear Bolt
- 5306-00-193-0886 MPN 3M33-4D15Close Tolerance Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-00-938-3974 MPN VCD0020-8-36Close Tolerance Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-945-2523 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM55156-8-20A | Huck International, Inc. |
EWSB26-8A20 | Sps Technologies, Llc |
VS2106-8-20 | Alcoa Fastening Systems |
AIC260-8A20 | Sps Technologies, Llc |
VS2106-8-20 | Alcoa Global Fasteners, Inc. |
EWSB26-8A20 | Sps Technologies, Llc |
AIC516C-8-20 | Sps Technologies, Llc |
GB511C-8-20 | Valley-todeco, Inc. |
GB511C-8-20 | Sps Technologies, Llc |
GB511C8-20 | Northrop Grumman Systems Corporation |
BM55156-8-20A | Huck Intl Inc |