NSN 5306-00-946-0410
Close Tolerance Hex Head Bolt
With strip type element in threads for locking feature.
Manufacturer part number NAS1224C9L for national stock number 5306009460410.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-946-0410.
-
MPN or Model
NAS1224C9L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.972 inches and 1.000 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1224 professional/industrial association standard
More from these suppliers
- 5940-00-764-1028 MPN NAS707S4Stud Terminal
- 5940-01-010-1571 MPN NAS1745-11Conductor Splice
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-005-0656 MPN NAS1152V4Close Tolerance Screw
- 5305-00-081-6668 MPN MS24693S2Machine Screw
- 5305-00-102-7584 MPN MS27039-1-48Machine Screw
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-946-0410 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1224C9L | National Aerospace Standards |