NSN 5306-00-947-2186
Coaxial Connector
2.070 inches fastener length, double hexagon head style, 0.350 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number EWSB22D10-A23 for national stock number 5306009472186.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-947-2186.
-
MPN or Model
EWSB22D10-A23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.632 inches -
Fastener Length
2.070 inches -
Head Style
Double hexagon -
Head Height
0.350 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-107, fscm 03680 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6412 MPN AIC812-08-4Machine Screw
- 5305-01-107-7229 MPN NAS1101E3H6Machine Screw
- 5305-01-173-3598 MPN LD111-0044-2408Close Tolerance Screw
- 5305-01-351-7817 MPN AIC4409-5D19Close Tolerance Screw
- 5305-01-392-3410 MPN AIC1656-5A26-6Shoulder Screw
- 5305-01-435-3458 MPN BACB30LU7-22Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-519-9206 MPN AIC618-5-29Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-947-2186 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22D10-A23 | Sps Technologies, Llc |
BM55132-10-23A | Huck International, Inc. |
VS2521-10F23 | Arconic Global Fasteners & Rings, |
AIC220-10A23 | Sps Technologies, Llc |
C081-10-23 | Sps Technologies, Llc |
C081-10-23 | Alcoa Global Fasteners, Inc. |
202-15520-10-23 | Triumph Aerostructures, Llc |
C081-10-23 | Lockheed Martin Corporation |
BM55132-10-23A | Huck Intl Inc |
VS2521-10F23 | Alcoa Global Fasteners, Inc. |