NSN 5306-00-947-6939
Coaxial Connector
2.828 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30LC6-36D for national stock number 5306009476939.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-947-6939.
-
MPN or Model
BACB30LC6-36D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
2.828 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.631 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-827-2550 MPN A02F5005-28Chute Support Assy
- 1560-00-869-0696 MPN 114S1758-1Track S Lever Guide
- 1560-00-991-4705 MPN A02F1004-2Left Ha Angle Hinge
- 1560-01-437-7701 MPN 114S3920-26Acft Edge Strip
- 1560-01-440-4032 MPN 145S4706-13Aircraft Structural Component Fitting
- 1560-01-444-3231 MPN 901-031-694-101Aircraft Structural Component Support
- 1560-01-453-1064 MPN 145S4905-36Aircraft Structural Retainer
- 1560-01-471-7528 MPN 145S4906-64Support Assy Fairin
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-947-6939 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LC6-36D | The Boeing Company |
BACB30LC6-36D | The Boeing Company |
BACB30LC6-36D | The Boeing Company |
BACB30LC6-36D | The Boeing Company |